**NEW!** Affordable 60ghz solution from Tachyon Networks.
- Virtually Interference Free
- 1km+ Distance
- 2.3gbps Throughput
- 32 Clients / Stations
- 3-D Beam forming antenna for auto alignment
- 120 x 50 degree beam width - ideal for access point / base station on PTMP
- POE out to power CCTV camera or Wi-Fi access point
Fiber-like speeds using the 60GHz band
2+ Gbps can be achieved and distances of up to 1
km without trenching, permits, or licenses - all with
quick and easy aiming using 3D beamforming.
All models support the full 60GHz band, including
channels 5 and 6 (57-71 GHz), enabling longer links
and increased co-location opportunities.
3D beamforming makes installation easy
The TNA-301 and TNA-302’s 3D beamforming
antennas enable automatic alignment decreasing
installation times from hours to minutes.
Best overall affordability
The low cost of the TNA-30x product family,
combined with high subscriber density and quick
installation, greatly decreases total cost of ownership
for service providers.
60 GHZ SPECS
Operating modes Station, Access Point (software configurable).
Max STA count per AP Up to 32 stations
TX Power 40 EIRP
Link encryption AES+GCMP
Frequency & supported channels
Full band: 57-71 GHz: channels: 1-6
Half channels: 1-11 (see notes on support site about half channel support)
Channel size options Full (2 GHz), half (1 GHz) (see notes on support site about half channel support)
Station scheduling TDMA: dynamic scheduling mechanism
TNA-301 Antenna 20 dBi 3D beamforming phased array with +/- 60° azimuth (120° total) and +/- 25° elevation
(50° total). Beam size is: 23° azimuth x 12° elevation. Vertical polarization.
TNA-302 Antenna 22 dBi 3D beamforming phased array with +/- 20° azimuth (40° total) and +/- 20° elevation
(40° total). Beam size is: 12° azimuth x 12° elevation. Vertical polarization.
Max MTU size 7900 b
Networking mode Transparent bridge
VLAN capabilities Data VLAN (in station mode) & management VLAN
Other features Traffic shaping (station mode), DHCP snooping, device discovery, speedtest, and more
IPv4/IPv6 support Both are supported
Management Web interface, SNMP v2 & v3, SNMP traps, & RESTful API (SSH available upon request).
Interfaces 1 x 2.5G ethernet, 1 x 1G ethernet, & 1 DC input screw terminal
Mount Pole or wall mountable via mounting backplate
Input power Passive PoE 24-52V, included 48V .5A PoE adapter and cable
Output power On 1G port: passive PoE out w/max .5A
Max power consumption 17W w/o PoE out in use, and 41W with it in use
Certifications FCC: Z9W-TNA-301, Z9W-TNA-302; IC: 11468A-TNA301, 11468A-TNA302
Operating temperature -30°C - 60°C
Unit dimensions & weight Height: 11" / 28cm, Width: 4" / 10.2 cm, Depth: 2" / 5.1cm, 24.5 oz / 695 g
LEDs Ethernet link status, wireless status, signal level, & power